Charger For 9.6V - 19.2V Craftsman Li-ion & Ni-cad Batteries

Charger for Craftsman 9.6-19.2V Ni-Cd Lithium Battery

This charger uses less power than other charging units, and protects battery cells, maximize battery life, and conserves energy.

This charger features a maintenance mode that when a battery is fully charged, this unit keeps those batteries conditioned for peak performance.

Specialize in designing and manufacturing various batteries tested by CE certification standards for Power Tool.

Pursing high quality, high performance price ratio and providing excellent service are our constant pursuit and goals.

• Product Type: Replacement Battery charger
• Compatible with: Lithium-Ion & Ni-Cd Batteries
• Input: 100V--240V
• Output: 9.6V--19.2V
• Efficiency: 65W
• Compatible With:
  For Craftsman Li-ion & Ni-Cd Batteries.
  For Craftsman DieHard C3 130279005, 1323903, 11375 11376, 315.115410, 315.11485, 315.114850, 315.114852
  For Craftsman C3 19.2-Volt XCP Compact Lithium-Ion Battery.
  For 18V Craftsaman 130260001 battery
  For Craftsman 14.4V 11447, 130139014 battery

Ways Of Repairing a Cordless Drill Charger

Cordless drills run primarily on a detachable and removable battery pack. When your cordless drill stops holding a charge, there are a few factors that come into play. But most commonly, you can trace the issue back to your battery pack or external battery charger. While you can rebuild the battery pack, it is a complex procedure. In many cases, you can solve the problem by repairing the battery charger itself.

• Remove the battery pack from the charging unit. Do this by pressing on the release buttons on either side of the battery pack. Disconnect the charger's power cord from the nearest electrical outlet.
• Blow out all dust and debris from within the charger's contacts with a can of compressed air. Use a medium-grit file to file down the contacts slightly. This is only to clean the charger's contacts of any accumulation of dirt or battery acid.
• Apply some rubbing alcohol to a clean wash cloth or paper towel. Thoroughly wipe down the inside of the battery charger's compartment. Allow five minutes for the alcohol to dry.
• Plug in the battery charger and insert the battery pack into the charger. You may have to remove and re-insert the battery pack several times before making a connection, depending on how much dirt has accumulated on the charger's contacts.

Refer any major electrical repairs to a power tool repair technician. Dismantling the charger yourself will void your drill's warranty.

More Drill Batteries Articles