Shopping direction: Drill Batteries Shop > Drill Charger > Maita DC10WD Charger

Charger for Makita 10.8V 12V BL1021B BL1041B Li-ion Battery

best battery for power tool Usually Ships in 2-7 working days     inquiry free
Images Battery Specifications Today's Price
MAKITA charger
Zoom Image
  • Input: 100-260V, 50 / 60HZ 40W
  • Output: 10.8-12V, DC 1.3A / 2A / 3A
  • It can charge Li-ion battery in a short time.
  • Non-toxic, odorless, so safe to use.
  • Plug: US plug
  • Condition: Brand New

On Sale: US $38.29

secure Easy and Secure Pay
moneyback 30-Day Money Back
warranty 1 Year Warranty

Makita DC10WD Charger for 10.8V 12V Batteries

MAKITA battery charger MAKITA battery charger MAKITA battery charger MAKITA battery charger

Charger for Battery models:

BL1040 BL1040B BL1015 BL1020B, BL1041 BL1041B BL1016 BL1021

Advantages of our charger:

Makita Tool DF031D DF031DWAE DF031DZ DF032DZ DF032DSAJ DF331D DF331DWAE DF331DZ DF332D DF332DZ DF332DSAJ
Makita Tool TD110D TD110DWAE TD110DZ TD111DZ TD111DSAJ
Makita Tool JR103D JR103DZ JR103DWAE JR104D JR105D JR105DZ JR105DWAE
Outil Makita HSS01D.
Makita Tool HP331D HP331DZ HP331DWAE HP332D HP332DZ HP332DSAJ
Makita Tool DC10SB


Ways Of Repairing a Cordless Drill Charger

Cordless drills run primarily on a detachable and removable battery pack. When your cordless drill stops holding a charge, there are a few factors that come into play. But most commonly, you can trace the issue back to your battery pack or external battery charger. While you can rebuild the battery pack, it is a complex procedure. In many cases, you can solve the problem by repairing the battery charger itself.

  • Remove the battery pack from the charging unit. Do this by pressing on the release buttons on either side of the battery pack. Disconnect the charger's power cord from the nearest electrical outlet.
  • Blow out all dust and debris from within the charger's contacts with a can of compressed air. Use a medium-grit file to file down the contacts slightly. This is only to clean the charger's contacts of any accumulation of dirt or battery acid.
  • Apply some rubbing alcohol to a clean wash cloth or paper towel. Thoroughly wipe down the inside of the battery charger's compartment. Allow five minutes for the alcohol to dry.
  • Plug in the battery charger and insert the battery pack into the charger. You may have to remove and re-insert the battery pack several times before making a connection, depending on how much dirt has accumulated on the charger's contacts.

Refer any major electrical repairs to a power tool repair technician. Dismantling the charger yourself will void your drill's warranty.

More Drill Batteries Articles